How do I set up an OkiData 590/591 Printer Paper Settings

OkiData - 590/591 Printer

____________________________________________________

  1. Prepare the printer for PAPER TEAR setting adjustment
    1. Press [SEL] so the select light is off.
    2. Press [PARK] to back up the paper to the load position.
    3. Press [FF/LOAD] to load the paper to the tear position.
    1. Press [SHIFT] + [Micro Feed Down] to bring the paper down OR [SHIFT] + [Micro Feed Up] to bring the paper up.
    2. To save adjustment press [SHIFT] + [TOF].
  2. To adjust the FIRST PRINT position
    1. Hold [TEAR] - holding [TEAR] positions the paper to the current first print position setting.
    2. Note the red line on the plastic print head shield should be viewed as the "underscore" of the first line to be printed.
    3. While holding [TEAR] press and hold [SHIFT] then release [TEAR].
    4. While holding [SHIFT] press either [Micro feed up] to move the paper up or [Micro feed down] to move paper down.  DO NOT release [SHIFT].
    5. When tear position is correct and while still holding [SHIFT] press [TOF].  This saves the current fist print position.  Release both.
  3. To test the first print position press [TEAR]
  4. Press [SEL] so the select light is lit.

About Us | System Software | Software Demo | Request info
Support FAQ'sHighlights | Home | Enhancements  
PO Box 262, Centereach, NY 11727
(631) 580-1115 or Fax (631) 580-7722