How do I set up an OKIPAGE 10ex

OKIPAGE 10ex

____________________________________________________

(The following instructions are to change the OkiPage 10ex's Optional Serial Port to a faster Baud Rate to enable Faster First Page Printing)

  1. Change FLOW CONTROL (MENU LEVEL 2)
    1. To enter Menu Level 2, hold down the "Menu1/Menu2" Key for three seconds.
    2. Continue pressing this Key until display = "SERIAL"
      1. Press ENTER to Select
      2. Press the RIGHT ARROW Key to move to "FLOW CONTROL"
      3. Press ENTER
      4. Press RIGHT ARROW Key to move to "XON/XOFF"
      5. Press ENTER to Select
  2. Change BAUD RATE (MENU LEVEL 2)
    1. With the Printer still in Menu Level 2 mode:
      1. Press "Menu1/Menu2" Key until display = "BAUD RATE"
      2. Press ENTER to Select
      3. Press RIGHT ARROW Key to 9600
      4. Press ENTER to Select
      5. Put Printer Back Online.

** BTI will have to change the Baud rate for this Printer Port on your System in order to match the Printer. Please coordinate doing this change with Mike (x-103). We will need to know the Printer(s) assignment as well (ie. P1, P2, P3,,, etc.)

 

About Us | System Software | Software Demo | Request info
Support FAQ'sHighlights | Home | Enhancements  
PO Box 262, Centereach, NY 11727
(631) 580-1115 or Fax (631) 580-7722